- Licensed & Insured
- 20+ Years Experience
- Fast Response
- Stillwater, MN
Need a Level 2 EV charger installed at home? Erick Marshall Electric installs code-compliant Level 2 charging stations for homeowners throughout Stillwater and the East Metro — including Dellwood, Grant, White Bear Lake, Mahtomedi, Woodbury, North Oaks, Lake Elmo, Scandia, and Hudson. A Level 2 charger fully recharges most EVs overnight on a dedicated 240-volt circuit, versus 2–3 days on a standard wall outlet. We handle the panel evaluation, permit, installation, and inspection from start to finish.
Most EV owners quickly outgrow the charging cord that comes with the car. A standard 120-volt outlet delivers a full charge in 2–3 days; a Level 2 charger, running on the same type of 240-volt circuit as a clothes dryer, does it in 4–5 hours — so your car is always ready in the morning. We run the heavy-duty wiring these units need, help you pick the best mounting location so the cord reaches your vehicle comfortably, and test the full connection before we leave.
Most electric vehicle owners prefer a Level 2 charger because it is much more efficient than the basic cord that comes with the car. These chargers require a 240-volt circuit, which is similar to what a large appliance like a clothes dryer uses. We specialize in running the heavy duty wiring needed for these high power units.
Our electricians help you choose the best location for your charger to ensure the cord reaches your vehicle easily. We mount the station securely and test the connection to make sure it delivers steady power. A professional setup protects your car’s battery and ensures your home wiring does not overheat during long charging sessions.
Adding an EV charger is one of the biggest single loads you can add to a home electrical system. Before any installation, we perform a full load analysis of your panel to confirm it can handle a dedicated 240-volt, 50-amp circuit without tripping breakers or straining your AC or kitchen appliances. If your panel is already at capacity, we can install a sub-panel or complete a full panel upgrade — and we’ll tell you plainly if you actually need one, not just to upsell the job.
Adding an electric vehicle charger can significantly increase your home’s electrical load. Before we begin the installation, we perform a detailed load analysis of your current electrical panel. We need to make sure your home can handle the extra power without tripping breakers or causing safety issues.
If your panel is already full, we can install a sub-panel or perform a full panel upgrade to create the necessary space. This ensures your home stays powered while your car charges. We assess your total energy use to prevent interference with your air conditioner or kitchen appliances. Our goal is to provide a seamless power solution tailored to your home and vehicle needs.
Most Minnesota cities, including Stillwater, require a permit and inspection for Level 2 EV charger installations. Skipping this step can create problems later, including issues at resale. Erick Marshall Electric handles the entire permitting process on your behalf — across Stillwater, Dellwood, Grant, White Bear Lake, Mahtomedi, Woodbury, North Oaks, Lake Elmo, Scandia, and Hudson — so you never have to deal with a city office or paperwork yourself.
An EV charger should always have its own dedicated circuit. This means the charger has a direct line to the breaker box and does not share power with any other outlets or lights. We install high-quality breakers and heavy-gauge copper wiring to handle the continuous flow of electricity required by your car.
Having a dedicated circuit prevents nuisance tripping and protects your home from electrical fires. We also ensure that the circuit is properly grounded and includes the necessary safety features to handle power surges. Our team follows the specific manufacturer instructions for your car brand to ensure the installation is perfect. This professional approach gives you peace of mind every time you plug in your vehicle.
An EV charger should always run on its own dedicated circuit, with a direct line to the breaker box and no shared load with other outlets or lights. We install quality breakers and heavy-gauge copper wiring rated for the continuous draw an EV charger requires, properly grounded and protected against surges. We follow your vehicle manufacturer’s installation specifications so the setup is correct for your specific car.
There are two main ways to install a home EV charger. Some homeowners prefer a plug-in model that uses a heavy-duty outlet. This allows you to remove the charger and take it with you if you move. Other people prefer a hardwired installation where the charger is connected directly to the home wiring.
Hardwired units are often more durable and provide slightly faster charging speeds. We discuss the pros and cons of each option with you to help you decide which best fits your lifestyle. No matter which style you choose, we ensure the installation is clean and professional. We use weather-resistant materials if your charger needs to be located outdoors or in an unheated garage.
You can install a Level 2 charger as a plug-in unit on a heavy-duty outlet — handy if you might take it with you when you move — or hardwired directly into your home’s wiring, which tends to be more durable and slightly faster. We’ll walk you through the tradeoffs for your situation and use weather-resistant materials for any charger mounted outdoors or in an unheated garage.
Many modern EV chargers come with smart features that allow you to control them from your phone. You can schedule your charging for late at night when electricity rates may be lower. We help you set up these smart stations and connect them to your home Wi-Fi network.
Monitoring your energy use helps you understand how much it costs to run your vehicle. We can also install energy management systems that balance the power between your car and the rest of your home. This technology prevents your system from overloading during peak energy use. Our team stays up to date with the latest charging technology to give you the most efficient home setup possible.
Working with a local Stillwater electrician ensures your installation complies with all Minnesota state codes. We take pride in our work and always treat your property with respect.
Many current Level 2 chargers connect to your home Wi-Fi so you can schedule charging for off-peak nighttime rates, track energy use, and monitor charging from your phone. We set up the smart features on your unit and can also discuss energy management options that balance the charger’s load against the rest of your home during peak usage.
Minnesota homeowners may qualify for a federal tax credit covering up to 30% of EV charger installation costs, and Xcel Energy offers additional rebates for qualifying installations in its service area. [CONFIRM: current program names, percentages, and caps change — verify against the current IRS and Xcel Energy program pages before publishing, and update this section whenever those programs change.] We identify which incentives you qualify for as part of your quote.
We keep the process simple from first call to final sign-off:
Most residential Level 2 EV charger installations in Minnesota range from about $1,000 to $2,500, depending on your panel’s capacity, the charger brand, and how far the wiring run is. If a panel upgrade is needed, cost increases. We provide a free on-site assessment so you know the exact price before any work begins.
Yes. Stillwater and most surrounding East Metro cities require a permit and inspection for Level 2 EV charger installations. Erick Marshall Electric manages the entire permitting process for you, so you never have to deal with the city directly.
For most homes with adequate panel capacity, installation takes a few hours. If a panel upgrade is required to support the 240-volt, 50-amp circuit, the project may take longer. We give you a clear timeline during your free assessment.
Many Minnesota homeowners qualify for a federal tax credit covering a portion of installation costs, and utility rebates may be available depending on your provider. We identify which incentives apply to your project as part of your quote.
Many East Metro homes can support a Level 2 charger with a dedicated 240-volt, 50-amp circuit added to the existing panel. We evaluate your panel during the free site visit and only recommend an upgrade if it’s genuinely needed.
Yes. In addition to Stillwater, we install EV chargers throughout the East Metro, including Dellwood, Grant, White Bear Lake, Mahtomedi, Woodbury, North Oaks, Lake Elmo, Scandia, and Hudson.
Ready for fast, reliable home EV charging? Erick Marshall Electric is the local, licensed choice for EV charger installation in Stillwater and the East Metro.
Call 651-426-3889 to request a free quote, or fill out the form below and we’ll get back to you the same day.
